Pool Equipment Repair
Pumps, heaters, filters, salt systems, and automation controls diagnosed and repaired by a licensed NJ pool contractor with fast response and a free estimate on every call.
WARNING SIGNS
Signs your pool equipment needs repair
Pool equipment rarely fails all at once. It gives warnings first. Catching these early saves money and prevents water quality problems.
- Pump is making grinding, screeching, or humming noises
- Water is not circulating or the jets feel weaker than normal
- Heater turns on but the water never gets warm
- Filter pressure gauge reads unusually high or low
- Salt cell is throwing error codes or not producing chlorine
- Circuit breaker trips every time the pump or heater kicks on
- Visible leaks around the pump, filter housing, or plumbing connections
- Automation panel shows faults or stops responding to commands
If any of these sound familiar, call (973) 520-5866. We can assess the damage in one visit.
WHY CHOOSE US
Why EverClear Pools & Spas for pool renovations
OSHA 30 trained, Certified Pool/Spa Operator, and Certified Pool/Spa Service Technician credentials on the repair team.
Pumps, variable speed motors, gas and electric heaters, DE/cartridge/sand filters, salt chlorine generators, and automation systems.
EverClear repairs what can be repaired. Replacement is recommended only when the repair cost approaches the value of a new unit.
If repair leads to replacement, or replacement reveals a plumbing issue, or the issue is actually structural, EverClear handles it all. No referral to another company.
OUR PROCESS
From assessment to finished renovation
Call and Describe the Problem
Tell us what is happening. Noises, error codes, leaks, temperature issues. The more detail, the faster the diagnosis.
On-Site Diagnosis
A technician inspects the equipment, tests electrical connections, checks flow rates, and identifies the root cause. You get a written repair estimate before any work begins.
Repair
Parts are sourced and the repair is completed on-site when possible. If a part needs to be ordered, the team schedules the return visit and confirms timing with you.
Test and Verify
The repaired equipment is run through a full cycle. Flow rates, temperatures, and pressure readings are confirmed before the technician leaves.
Pool equipment repair services we offer in Northern New Jersey
Pool equipment problems range from a $20 capacitor to a full mechanical overhaul. Here is what EverClear diagnoses and repairs.
Pool Pump Repair
Motor replacement, impeller clearing, seal replacement, and wiring repairs for single-speed, dual-speed, and variable-speed pumps.
Pool Heater Repair
Gas valve, igniter, heat exchanger, and thermostat repairs for natural gas, propane, and electric pool heaters. Combustion analysis included.
Filter System Repair
DE grid replacement, cartridge swaps, multiport valve rebuilds, and pressure relief for sand, cartridge, and DE filter systems.
Salt Chlorine Generator Repairr
Cell cleaning, flow sensor replacement, control board diagnostics, and cell replacement for salt chlorination systems.
Vinyl Liner Replacement
Full liner replacement for vinyl pools. Pattern and color selection, wall panel inspection, and track system repair included in the scope.
Pool Automation Repair
Troubleshooting and repair for automation panels, actuators, remote controls, and smart home integrations.
Every renovation starts with a free on-site assessment.
Call (973) 520-5866Check Out Some Of Our Other Projects!
Common questions about pool equipment repair
It depends on the equipment type and the specific failure. A capacitor or seal replacement costs far less than a full motor swap or heat exchanger replacement. EverClear provides a written estimate after diagnosis so you know the cost before authorizing work.
Most single-component repairs are completed in one visit, usually within a few hours. If a part needs to be ordered, the return visit is scheduled as soon as the part arrives, typically within a few days.
warranty terms for repair labor and replacement parts]. All warranty terms are provided in writing.
Yes. EverClear services pool equipment regardless of who installed it or built the pool.
EverClear Pools & Spas holds NJ Home Improvement Contractor license #13VH06118200 with full liability and workers’ compensation insurance.
EverClear recommends replacement when the repair cost exceeds 50% of a new unit’s installed price, when the equipment is past its expected service life, or when replacement parts are no longer available.
Yes. EverClear inspects all equipment during the assessment and recommends replacement only for components that are failing or undersized. If your pump and filter are in good shape, they stay.
Yes. If you are replacing a failed single-speed pump, for example, upgrading to a variable-speed model during the same visit is common and saves on labor.
Yes. EverClear diagnoses and repairs salt chlorine generators, including cell cleaning, flow sensor issues, and control board failures.
Stop resetting the breaker and call (973) 520-5866. Repeated tripping usually indicates a wiring fault, motor short, or ground fault that needs professional diagnosis to prevent electrical hazard.
Don't see your question? Call us at (973) 520-5866. We answer every call.
AREAS WE SERVE
Paterson · Wayne · Clifton · Hawthorne · Totowa · Fair Lawn · Hewitt · West Milford · Ringwood · Wanaque · Pompton Lakes · Oakland